Uncategorized
Showing 1–16 of 20 results
-
For ripping and cross-cutting of solid wood and board materials on table saws, special sawing machines, etc.
Grind ATB
Ref. No D(Dia) B(Kerf) b(Plate) d(Borde) Z(Teeth) B(Hook) 01-01002401 10″ .126″ .087″ 5/8″ 24 20° 01-01202802 12″ .126″ .087″ 1″ 28 20° 01-01403202 14″ .138″ .098″ 1″ 32 20° -
For ripping and cross-cutting of solid wood and board materials on table saws, special sawing machines, with chip limiter to reduce kickbacks.
Grind ATB
Ref. No D(Dia) B(Kerf) b(Plate) d(Borde) Z(Teeth) B(Hook) 03-01002401 10″ .126″ .087″ 5/8″ 24 20° 03-01202802 12″ .126″ .087″ 1″ 28 20° 03-01403202 14″ .138″ .098″ 1″ 32 20° -
Specially designed for heavy duty ripping in hard or soft woods.
Grind F
Ref. No D(Dia) B(Kerf) b(Plate) d(Borde) Z(Teeth) B(Hook) 05-01002401 10″ .145″ .095″ 5/8″ 24 20° 05-01202802 12″ .160″ .110″ 1″ 28 20° 05-01403202 14″ .170″ .120″ 1″ 32 20° 05-01603602 16″ .170″ .120″ 1″ 36 20° 05-01804002 18″ .184″ .134″ 1″ 40 20° 05-30002830 300mm 4.4mm 3.0mm 30mm 28 20° (=) (=) 2 keyways 20x5mm
-
The clearest cutting rip blades for all glue line applications on hard or soft woods.
Grind TC
Ref. No D(Dia) B(Kerf) b(Plate) d(Borde) Z(Teeth) B(Hook) 07-01003001 10″ .145″ .095″ 5/8″ 30 20° 07-01203602 12″ .160″ .110″ 1″ 36 20° 07-01203605 12″ .126″ .083″ 3-1/8″ 36 20° (*)(~) 07-01203608 12″ .150″ .110″ 3-1/8″ 36 20° (*)(~) 07-01203609 12″ .160″ .110″ 3-1/8″ 36 20° (*)(~) 07-01404002 14″ .170″ .120″ 1″ 40 20° 07-01404003 14″ .169″ .120″ 2″ 36 20° (+)(^) 07-01603602 16″ .170″ .120″ 1″ 36 20° 07-30003670 300mm 4.2mm 2.8mm 70mm 36 20° (=) (~) For “Mereen Johnson” machine
(^) For “Diehl” machine
(+) pin hole 9/16″ on 5″ b/c
(*) keyway 1/4″ x 1/4″ round style + 2 keyways 1/2″ x 1/4″
(=) 2 keyways 20x5mm -
This blade is specially designed for ripping and cross-cutting in solid wood, plywood and particle boards. The best solution where one blade can be used in different types of cutting.
Grind 4ATB+R
Ref. No D(Dia) B(Kerf) b(Plate) d(Borde) Z(Teeth) B(Hook) 09-01005001 10″ .126″ .087″ 5/8″ 50 15° 09-01206002 12″ .150″ .110″ 1″ 60 15° 09-01407002 14″ .155″ .110″ 1″ 70 15° 09-01608002 16″ .165″ .120″ 1″ 80 15° -
For fine cross cutting of expensive material where savings is an important matter. ATB Grind for cutting solid wood, plywood and veneers. TC Grind for cutting plastic, PVC and plexiglass.
Grind ATB & TC
Ref. No D(Dia) B(Kerf) b(Plate) d(Borde) Z(Teeth) B(Hook) 10-00806001 8″ .090″ .063″ 5/8″ 60 ATB 10° 10-00806011 8″ .090″ .063″ 5/8″ 60 TC 10° 10-01002401 10″ .098″ .071″ 5/8″ 24 ATB 20° 10-01004001 10″ .090″ .063″ 5/8″ 40 ATB 15° 10-01008001 10″ .090″ .063″ 5/8″ 80 ATB 5° 10-01008011 10″ .090″ .063″ 5/8″ 80 TC 5° 10-01210002 12″ .090″ .063″ 1″ 100 ATB 5° 10-012100012 12″ .090″ .063″ 1″ 100 TC 5° -
Universal application for cutting along and across the grain in solid wood and board materials.
Grind ATB
Ref. No D(Dia) B(Kerf) b(Plate) d(Borde) Z(Teeth) B(Hook) 11-00804001 8″ .110″ .070″ 5/8″ 40 15° 11-00804002 8″ .110″ .070″ 1″ 40 15° 11-00806001 8″ .110″ .078″ 5/8″ 60 10° 11-00906001 9″ .128″ .087″ 5/8″ 60 10° 11-01004001 10″ .126″ .087″ 5/8″ 40 15° 11-01004002 10″ .126″ .087″ 1″ 40 15° 11-01006001 10″ .126″ .087″ 5/8″ 60 10° 11-01006002 10″ .126″ .087″ 1″ 60 10° 11-01008001 10″ .126″ .087″ 5/8″ 80 5° 11-01204802 12″ .126″ .087″ 1″ 48 15° 11-01206002 12″ .126″ .087″ 1″ 60 10° 11-01207202 12″ .126″ .087″ 1″ 72 10° 11-01210002 12″ .126″ .087″ 1″ 100 5° 11-01406002 14″ .155″ .109″ 1″ 60 10° 11-01408002 14″ .150″ .109″ 1″ 80 5° 11-01410002 14″ .150″ .109″ 1″ 100 5° 11-01604002 16″ .155″ .110″ 1″ 40 15° 11-01606002 16″ .155″ .110″ 1″ 60 15° 11-01608002 16″ .155″ .110″ 1″ 80 15° 11-01806002 18″ .180″ .134″ 1″ 60 10° 11-01808002 18″ .180″ .134″ 1″ 80 10° 11-01810002 18″ .180″ .134″ 1″ 100 10° 11-30006030 300mm 3.2mm 2.2mm 30mm 60 10° (*) 11-30007230 300mm 3.2mm 2.2mm 30mm 72 10° (*) (*) 2 combi pin holes 2/7/42mm – 2/9/46mm – 2/10/60mm
-
For the best sizing and finishing; cuts in plywood, veneer, plastic laminated board material, on table saws and vertical sizing saws.
Grind TC
Ref. No D(Dia) B(Kerf) b(Plate) d(Borde) Z(Teeth) B(Hook) 13-00804001 8″ .110″ .070″ 5/8″ 40 15° 13-00806001 8″ .118″ .078″ 5/8″ 60 10° 13-01004001 10″ .126″ .087″ 5/8″ 40 15° 13-01006001 10″ .126″ .087″ 5/8″ 60 10° 13-01008001 10″ .126″ .087″ 5/8″ 80 5° 13-01206002 12″ .126″ .087″ 1″ 60 10° 13-01207202 12″ .126″ .087″ 1″ 72 10° 13-01210002 12″ .126″ .087″ 1″ 100 5° 13-01406002 14″ .155″ .110″ 1″ 60 10° 13-01408002 14″ .150″ .109″ 1″ 80 5° 13-01410002 14″ .150″ .109″ 1″ 100 5° 13-01608002 16″ .155″ .110″ 1″ 80 15° 13-01808002 18″ .180″ .134″ 1″ 80 10° 13-01810002 18″ .180″ .134″ 1″ 100 10° 13-22006430 220mm 3.2mm 2.2mm 30mm 64 10° (**) 13-25008030 250mm 3.2mm 2.2mm 30mm 80 5° (*) 13-30006030 300mm 3.2mm 2.2mm 30mm 60 10° (*) 13-30007230 300mm 3.2mm 2.2mm 30mm 72 10° (*) 13-30009630 300mm 3.2mm 2.2mm 30mm 96 5° (*) 13-35008430 350mm 3.5mm 2.5mm 30mm 84 10° (*) (*) 2 combi pin holes 2/7/42mm – 2/9/46mm – 2/10/60mm
(**) 2 pin holes 2/7/42mm -
For smooth cuts on wood moldings and the least possible grabbing of materials.
Grind 4ATB+R
Ref. No D(Dia) B(Kerf) b(Plate) d(Borde) Z(Teeth) B(Hook) 15-01006001 10″ .110″ .080″ 5/8″ 60 2° neg. 15-01008001 10″ .102″ .072″ 5/8″ 80 0° 15-01008011 10″ .102″ .072″ 5/8″ 80 5° neg. 15-01206002 12″ .110″ .080″ 1″ 60 0° 15-01208002 12″ .110″ .080″ 1″ 80 0° 15-01208012 12″ .122″ .095″ 1″ 80 0° 15-01210001 12″ .128″ .098″ 5/8″ 100 5° neg. 15-01210002 12″ .128″ .098″ 1″ 100 5° neg. 15-01210011 12″ .128″ .098″ 5/8″ 100 0° 15-01410001 14″ .150″ .120″ 5/8″ 100 5° neg. (~) 15-01510002 15″ .120″ .098″ 1″ 100 2° neg. (>) (>) For “Hitachi” Mitre Saw
(~) For “Pistorius” Mitre Saw -
For fine cuts in laminated board materials on both sides with melamine, formica, veneer, etc. On table saws without scoring unit, vertical panel sizing saws, radial arm saws, mitre and chop saws. Extra hard sub-micro grain carbide tips for long edge life.
Grind ATB 35° neg
Ref. No D(Dia) B(Kerf) b(Plate) d(Borde) Z(Teeth) B(Hook) 17-01008001 10″ .126″ .087″ 5/8″ 80 5° neg. 17-01209602 12″ .126″ .087″ 1″ 96 5° neg. 17-01410001 14″ .148″ .118″ 1″ 100 2° neg. 17-22006430 220mm 3.2mm 2.2mm 30mm 64 5° neg. (**) 17-25008030 250mm 3.2mm 2.2mm 30mm 80 5° neg. (*) 17-30309630 303mm 3.2mm 2.2mm 30mm 96 5° neg. (*) (*) 2 combi pin holes 2/7/42mm – 2/9/46mm – 2/10/60mm
(**) 2 pin holes 7/42mm -
The best option for chip-free top and bottom, cuts in double sided materials such as melamine, double faced high and low pressure laminates. To use in radial or table saws.
Grind D-TC neg.
Ref. No D(Dia) B(Kerf) b(Plate) d(Borde) Z(Teeth) B(Hook) 19-00706001 7-1/4″ .102″ .072″ 5/8″ 60 0° 19-00806001 8″ .106″ .072″ 5/8″ 60 0° 19-01008001 10″ .115″ .085″ 5/8″ 80 5° neg. 19-01008011 10″ .115″ .085″ 5/8″ 80 0° 19-01210002 12″ .126″ .095″ 1″ 100 5° neg. 19-01210012 12″ .126″ .095″ 1″ 100 0° 19-01410002 14″ .150″ .110″ 1″ 100 2° neg. 19-01612002 16″ .150″ .110″ 1″ 120 2° neg. 19-25008030 250mm 2.9mm 2.2mm 30mm 80 2° neg. (*) 19-30309630 303mm 3.2mm 2.2mm 30mm 96 5° neg. (*) 19-30309632 303mm 3.2mm 2.2mm 30mm 96 0° (*) (*) 2 combi pin holes 2/7/42mm – 2/9/46mm – 2/10/60mm
-
For perfect cutting quality in melamine-faced board materials on both sides up to 30 mm cutting height. For use on table saws and vertical panel sizing.
Grind V-Hollow
Ref. No D(Dia) B(Kerf) b(Plate) d(Borde) Z(Teeth) B(Hook) 21-22004030 220mm 3.2mm 2.2mm 30mm 40 12° (**) 21-25004830 250mm 3.2mm 2.2mm 30mm 48 12° (*) 21-30306030 303mm 3.2mm 2.2mm 30mm 60 12° (*) (*) 2 combi pin holes 2/7/42mm – 2/9/46mm – 2/10/60mm
(**) 2 pin holes 7/42mm -
For profiles and sheets of aluminum and plastics on chop-mitre saws and special machines. The negative tooth shape prevents filling up of the gullet. Use coolant or lubricant and clamp the material firmly.
Grind TC neg
Ref. No D(Dia) B(Kerf) b(Plate) d(Borde) Z(Teeth) B(Hook) 23-00706001 7-1/4″ .112″ .087″ 5/8″ 60 5° neg. 23-01006001 10″ .126″ .102″ 5/8″ 60 5° neg. 23-01008001 10″ .126″ .102″ 5/8″ 80 5° neg. 23-01010001 10″ .126″ .102″ 5/8″ 100 5° neg. 23-012007202 12″ .128″ .102″ 1″ 72 5° neg. 23-01208002 12″ .128″ .102″ 1″ 80 5° neg. 23-01210001 12″ .128″ .102″ 5/8″ 100 5° neg. 23-01210002 12″ .128″ .102″ 1″ 100 5° neg. 23-01410802 14″ .138″ .110″ 1″ 108 5° neg. 23-01410001 14″ .150″ .126″ 5/8″ 100 2° neg. (~) 23-01510002 15″ .120″ .098″ 1″ 100 2° neg. (^) 23-01610002 16″ .150″ .126″ 1″ 100 2° neg. 23-01810002 18″ .165″ .134″ 1″ 100 2° neg. 23-02010002 20″ .174″ .134″ 1″ 100 0° 23-02012002 20″ .174″ .134″ 1″ 120 0° 23-02014002 20″ .174″ .134″ 1″ 140 0° (~) For “Pistorius” Mitre Saw
(^) For “Hitachi” Mitre Saw -
For scoring of plastic laminated board materials in conjunction with panel sizing saw blades TC on table saws.
Grind ATB
Ref. No D(Dia) B(Kerf) b(Plate) d(Borde) Z(Teeth) B(Hook) 25-08002020 80mm 2.8-3.6mm 2.0mm 20mm 2×10 12° 25-10002420 100mm 2.8-3.6mm 2.0mm 20mm 2×12 12° 25-10002422 100mm 2.8-3.6mm 2.0mm 22mm 2×12 12° 25-12002420 120mm 2.8-3.6mm 2.0mm 20mm 2×12 12° 25-12002422 120mm 2.8-3.6mm 2.0mm 22mm 2×12 12° 25-12002403 120mm 2.8-3.6mm 2.0mm 3/4″ 2×12 12° 25-12002450 120mm 2.8-3.8mm 2.0mm 50mm 2×12 12° 25-12502422 125mm 2.8-3.6mm 2.0mm 22mm 2×12 12° -
Manufactured to work in portable machines with all the technical features of “high industrial quality” saw blades.
Grind ATB & TC
Ref. No D(Dia) B(Kerf) b(Plate) d(Borde) Z(Teeth) B(Hook) 27-00702401 7-1/4″ .102″ .072″ 5/8″ 24 ATB 12° 27-00704001 7-1/4″ .102″ .072″ 5/8″ 40 ATB 12° 27-00706001 7-1/4″ .102″ .072″ 5/8″ 60 ATB 12° 27-00704013 7-1/4″ .102″ .072″ 5/8″ 40 TC 12° 27-16004820 160mm 2.2mm 1.6mm 20mm 48 ATB 8° (=) (=) 2 pin holes 2/6/32.5mm
-
For all materials used on building sites, such as wood with nails, clips, concrete residues, tubes and similar wood inclusions.
Grind TC/TC
Ref. No D(Dia) B(Kerf) b(Plate) d(Borde) Z(Teeth) B(Hook) 29-01002001 10″ .126″ .087″ 5/8″ 20 5° neg. 29-01202402 12″ .126″ .087″ 1″ 24 5° neg. 29-01402802 14″ .137″ .098″ 1″ 28 5° neg. 29-01803602 18″ .165″ .110″ 1″ 36 5° neg.
Showing 1–16 of 20 results