TYPE 17 Doble Face Laminate Saw Blades

0 out of 5

For fine cuts in laminated board materials on both sides with melamine, formica, veneer, etc. On table saws without scoring unit, vertical panel sizing saws, radial arm saws, mitre and chop saws. Extra hard sub-micro grain carbide tips for long edge life.

Grind ATB 35° neg

Ref. No D(Dia) B(Kerf) b(Plate) d(Borde) Z(Teeth) B(Hook)
17-01008001 10″ .126″ .087″ 5/8″ 80 5° neg.
17-01209602 12″ .126″ .087″ 1″ 96 5° neg.
17-01410001 14″ .148″ .118″ 1″ 100 2° neg.
17-22006430 220mm 3.2mm 2.2mm 30mm 64 5° neg. (**)
17-25008030 250mm 3.2mm 2.2mm 30mm 80 5° neg. (*)
17-30309630 303mm 3.2mm 2.2mm 30mm 96 5° neg. (*)

(*) 2 combi pin holes 2/7/42mm – 2/9/46mm – 2/10/60mm
(**) 2 pin holes 7/42mm

Product Description

For fine cuts in laminated board materials on both sides with melamine, formica, veneer, etc. On table saws without scoring unit, vertical panel sizing saws, radial arm saws, mitre and chop saws. Extra hard sub-micro grain carbide tips for long edge life.

Grind ATB 35° neg

Ref. No D(Dia) B(Kerf) b(Plate) d(Borde) Z(Teeth) B(Hook)
17-01008001 10″ .126″ .087″ 5/8″ 80 5° neg.
17-01209602 12″ .126″ .087″ 1″ 96 5° neg.
17-01410001 14″ .148″ .118″ 1″ 100 2° neg.
17-22006430 220mm 3.2mm 2.2mm 30mm 64 5° neg. (**)
17-25008030 250mm 3.2mm 2.2mm 30mm 80 5° neg. (*)
17-30309630 303mm 3.2mm 2.2mm 30mm 96 5° neg. (*)

(*) 2 combi pin holes 2/7/42mm – 2/9/46mm – 2/10/60mm
(**) 2 pin holes 7/42mm

  • All the Saw Blades are 100% guaranteed against material or manufacturing defects. We will only replace tools which prove defective upon our examination. The Blades have to be used properly in handing and application, and have to be sharpened with correct technical specifications.

  • All the Saw Blades offered in this catalog are subject to availability.

  • The specifications in this catalog are subject to technical alterations due to our continuous improvement.

  • Prices are subject to change without notice. Orders are accepted on the basis of prices in effect on the date of order.

Top