TYPE 13 Special Cut-off Saw Blades

0 out of 5

For the best sizing and finishing; cuts in plywood, veneer, plastic laminated board material, on table saws and vertical sizing saws.

Grind TC

Ref. No D(Dia) B(Kerf) b(Plate) d(Borde) Z(Teeth) B(Hook)
13-00804001 8″ .110″ .070″ 5/8″ 40 15°
13-00806001 8″ .118″ .078″ 5/8″ 60 10°
13-01004001 10″ .126″ .087″ 5/8″ 40 15°
13-01006001 10″ .126″ .087″ 5/8″ 60 10°
13-01008001 10″ .126″ .087″ 5/8″ 80
13-01206002 12″ .126″ .087″ 1″ 60 10°
13-01207202 12″ .126″ .087″ 1″ 72 10°
13-01210002 12″ .126″ .087″ 1″ 100
13-01406002 14″ .155″ .110″ 1″ 60 10°
13-01408002 14″ .150″ .109″ 1″ 80
13-01410002 14″ .150″ .109″ 1″ 100
13-01608002 16″ .155″ .110″ 1″ 80 15°
13-01808002 18″ .180″ .134″ 1″ 80 10°
13-01810002 18″ .180″ .134″ 1″ 100 10°
13-22006430 220mm 3.2mm 2.2mm 30mm 64 10° (**)
13-25008030 250mm 3.2mm 2.2mm 30mm 80 (*)
13-30006030 300mm 3.2mm 2.2mm 30mm 60 10° (*)
13-30007230 300mm 3.2mm 2.2mm 30mm 72 10° (*)
13-30009630 300mm 3.2mm 2.2mm 30mm 96 (*)
13-35008430 350mm 3.5mm 2.5mm 30mm 84 10° (*)

(*) 2 combi pin holes 2/7/42mm – 2/9/46mm – 2/10/60mm
(**) 2 pin holes 2/7/42mm

Product Description

For the best sizing and finishing; cuts in plywood, veneer, plastic laminated board material, on table saws and vertical sizing saws.

Grind TC

Ref. No D(Dia) B(Kerf) b(Plate) d(Borde) Z(Teeth) B(Hook)
13-00804001 8″ .110″ .070″ 5/8″ 40 15°
13-00806001 8″ .118″ .078″ 5/8″ 60 10°
13-01004001 10″ .126″ .087″ 5/8″ 40 15°
13-01006001 10″ .126″ .087″ 5/8″ 60 10°
13-01008001 10″ .126″ .087″ 5/8″ 80
13-01206002 12″ .126″ .087″ 1″ 60 10°
13-01207202 12″ .126″ .087″ 1″ 72 10°
13-01210002 12″ .126″ .087″ 1″ 100
13-01406002 14″ .155″ .110″ 1″ 60 10°
13-01408002 14″ .150″ .109″ 1″ 80
13-01410002 14″ .150″ .109″ 1″ 100
13-01608002 16″ .155″ .110″ 1″ 80 15°
13-01808002 18″ .180″ .134″ 1″ 80 10°
13-01810002 18″ .180″ .134″ 1″ 100 10°
13-22006430 220mm 3.2mm 2.2mm 30mm 64 10° (**)
13-25008030 250mm 3.2mm 2.2mm 30mm 80 (*)
13-30006030 300mm 3.2mm 2.2mm 30mm 60 10° (*)
13-30007230 300mm 3.2mm 2.2mm 30mm 72 10° (*)
13-30009630 300mm 3.2mm 2.2mm 30mm 96 (*)
13-35008430 350mm 3.5mm 2.5mm 30mm 84 10° (*)

(*) 2 combi pin holes 2/7/42mm – 2/9/46mm – 2/10/60mm
(**) 2 pin holes 2/7/42mm

  • All the Saw Blades are 100% guaranteed against material or manufacturing defects. We will only replace tools which prove defective upon our examination. The Blades have to be used properly in handing and application, and have to be sharpened with correct technical specifications.

  • All the Saw Blades offered in this catalog are subject to availability.

  • The specifications in this catalog are subject to technical alterations due to our continuous improvement.

  • Prices are subject to change without notice. Orders are accepted on the basis of prices in effect on the date of order.

Top